2022 Hiniker Dual-Motor Electric Conveyor 835

2022 Hiniker Dual-Motor Electric Conveyor 835

Spread ice control materials quickly and easily with an efficient Hiniker spreader. Snow removal contractors looking for additional profits will find them in ice control.

Tailor your material application rates accurately with Hiniker 635 & 835 Dual-Motor Electric Conveyor Spreaders. Hiniker’s convenient in-cab console provides individual variable speed control for both the conveyor and spinner. Two electric motors offer quiet operation in residential and office areas, plus no downtime for refueling. A 25-ft spread pattern and big 1.50 or 1.80 yard capacities mean you’ll spend your time productively, rather than constantly reloading.

Features may include:

• Dual Electric Drive Motors independently power the conveyor and spinner

• Stainless Steel Construction

• Adjustable Stainless Steel Inverted vee

Convenient tip-up spinner assembly for unloading unused material and easy trailer hitch access. Standard or extended chute length. Available on all Hiniker Dual-Motor Electric and OHV Gas Engine Spreaders.

Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard.

14-gauge spinner chute assembly with three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch diameter with three welded fins. Spinner shaft of 3/4" diameter steel is mounted with sealed, self-aligning bearing.

Briggs & Stratton Intek OHV air-cooled, single cylinder, four-cycle engine is mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred to the gear case through roller chain and sprockets.

The conveyor gear case has a cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants.

Heavy-duty, self-cleaning, heat-treated pintle chain with 24,000 lb. tensile strength. Two screw-type adjusters are provided to take up chain slack.